APPLYING THE WORDS TO YOUR WALL

Your quote is made up of three layers. The top layer is the sticking paper, the actual letters are the middle layer, and the bottom layer is the backing paper. All surfaces must be flat, clean and dry before applying. The words will not adhere to stucco or brick like surfaces.

Step One: Use a tape measure to determine exactly where your words will be placed. Take your sheet of words and flatten the surface out so there is no rolling up. On a flat surface gently rub over the words to make sure all letters have adhered to the sticking paper.

Step Two: Line up and tape the top edge of your words where you intend to place them. You will be able to see the words through the sticking paper. Flip up the words and carefully peel the backing paper away. Put the words back in place and position exactly where they should go.

Step Three: Use a credit card and rub over the top layer working from the center out with pressure. Do this twice. This will help the words adhere firmly to the wall.

Step Four:  Carefully peel back the sticking paper to reveal your letters!

Note: When you need to remove the words simply use a blow dryer on the low level, dry onto the wall to loosen the letters and gently peel off with tweezers.